Rupert Neve Designs RNHP
- Wide-open, extremely detailed sound for the most accurate headphone performance
- High-power, high-headroom design easily drives high-impedance headphones (up to 600 Ohm)
- Near-zero output impedance (0.01 Ohm at 1kHz) and direct-coupled amplifier design ensure perfect translation across any headphones
- Highly damped stereo potentiometer provides precise volume control and ideal left-right balance
- Operates via the included 6-watt power supply or an optional 24V, 0.25A minimum battery source (not supplied by RND)
Product information "Rupert Neve Designs RNHP"
Whether you’re tracking, mixing, or simply enjoying your favorite music, the RNHP delivers headphone amplification without compromise. Designed by Rupert Neve and his team, this reference-quality amplifier ensures your headphones perform to their full potential — with stunning detail, wide-open soundstage, and effortless power. Unlike typical headphone amps that suffer from limited headroom and coloration, the RNHP provides a clean, transparent signal path capable of driving even high-impedance headphones with authority and precision.
| Safety Warnings: | The specific safety instructions for the product are provided in its user manual. |
|---|
Rupert Neve Designs
Rupert Neve Designs
LLC
PO BOX 1969
Wimberley, TX 78676
USA
https://rupertneve.com/
Mega Audio GmbH
Feldborn 3 55444 Waldlaubersheim Germany
info@megaaudio.de
https://www.megaaudio.de/
MAXIMUM INPUT LEVELS:
- “A” XLR I/P: +22.8 dBu @ 1 kHz
- “B” RCA I/P: +14.7 dBu @ 1 kHz
- “C” 3.5mm I/P: +3.3 dBu @ 1 kHz
OUTPUT POWER:
- Typical headphones, Z=44 Ohm: 3.617 VAC RMS @ 1 kHz = 300 mW RMS
- 16 Ohm typical load: 1.933 VAC RMS @ 1 kHz = 230 mW RMS
- 150 Ohm typical load: 5.108 VAC RMS @ 1 kHz = 175 mW RMS
OUTPUT IMPEDANCE:
- 0.08 Ohm @ 1 kHz, 16–150 Ohm load, 0 dBu input
FREQUENCY RESPONSE:
- ±0.2 dB from 10 Hz to 120 kHz
NOISE:
- Measured with typical headphones, Z = 44 Ohm, BW 22 Hz – 22 kHz
- “A” XLR Input: -101.9 dBV
- “B” RCA Input: -100.9 dBV
- “C” 3.5mm Input: -88.8 dBV
DIMENSIONS:
- 6.5” wide x 4.6” deep x 1.9” tall
POWER SUPPLY REQUIREMENTS:
- 24VDC @ 0.25A (6 W) minimum
- Use supplied power adapter for optimal output power and noise performance
- May also be used with a properly configured 24V battery
